and/or specifications. • Install various parts and assemblies such as landing gear, aircraft control surfaces, exterior panels, carpets, blankets, roller trays/ball mats, stowbins, sidewalls, ceiling panels, lavatories, galleys, doors, and seats. • Install various aircraft system components such as tubing, valves, regulators, actuators, compressors, and ducts.
• Appropriate protective clothing/equipment determined by the task you are performing. • Operate mechanical lifts of various types (e. g. ladders, tiger and snorkel lifts). • Various tools such as Rivet gun and bucking bar, screwdrivers, lock bolt puller, power screwdriver, C-squeeze, ratchet wrench, nut runner, Winslow, 90-Degree
Power Vane, or Quackenbush and various other hand tools. • Chemical solvents, sealants, coatings, primers, adhesives, paints and special finishes • Inspect your work quality and check for FOD (Foreign Object Debris).
• Use of high impact vibratory tools (bucking/riveting). • Climbing/balancing (stairs, ladders, poles, scaffolding, inclined surfaces), Crawling, Crouching (squatting), • Working around energized sources (electrical equipment and hazards/shock, e. g. circuit breakers and wiring) and exposure to constant noise. • Finger manipulation (keyboarding, other). • Reading from a computer screen, printed drawings or documents. • Ability to adhere to high standards of Safety and Compliance
to regulation • Carrying/Lifting up to 10-35 pounds • Flexion/Extension (head bent down, head bent back), Handling, Kneeling, Bending at the waist, eaching (overhead), Rotation of head/neck, Standing, Twisting at the waist and walking.
Basic Qualifications (Required Skills/Experience): Ability to work a variable shift (1st, 2nd, or 3rd ) 7+ years of experience in aerospace, fabrication, or manufacturing 7+ years of aerospace systems experience with hydraulics, ICS, PECS, duct installation, IFE, interior decorative repair, waste and potable water systems. Must be proficient in using Microsoft applications such as Word, Excel, Power Point & Outlook, etc.
Must have demonstrated strong effective communication, work ethic and sense of urgency for completing assigned task/work. Preferred Qualifications (Desired Skills/Experience): 10+ years’ related work experience or an equivalent combination of education and experience Education / Experience: Education/experience typically acquired through basic education (e. g. High School diploma/GED) and typically 4 or more years' related work experience or an equivalent combination of education and experience (e. g. vocational school/Associate+2 years' related work, Bachelor, etc. ). Additional Comments: Please note - These positions are variable shifts, contractors must be able to work 1st, 2nd or 3rd shift.
Boeing South Carolina Site Requisition – Airport and North Campus SOW Business need Building location dependent on business need Successful completion and clearance of all screening requirements is a contingency for this assignment. Experience understanding and interpreting detailed written and verbal work instructions and processes. Must be proficient in using Microsoft applications such as Word, Excel, Power Point & Outlook, etc. Must have demonstrated strong effective communication, work ethic and sense of urgency for completing assigned task/work.
Deviation Approval Rules 1. To Start Assignment: Must have a negative drug screen and all onboarding paperwork completed by Tuesday prior to start date 2. Training Period: All remaining screening must be completed and cleared before the end of the training period or the contractor cannot move to the floor. Supplier must notify CLA when screening is complete. 3. Suspension: Contractors who have not completed screening by the end of the training period will be suspended from work until screening is complete; upon clearance, they may return to their regular shift 4.
Disqualification: Contractors who do not meet contingency requirements or who do not complete screening in a timely manner will be removed from assignment. Position Comments: Manager contact: No Shifts: 1st, 2nd, or 3rd. Contractors must be available to work all 3 shifts. Shifts are dependent on Business needs. Onsite/remote/hybrid: Onsite Interview Information: Contractor selected based on resume/experience Physical demands (if any): Carrying/Lifting up to 10-35 pounds Successful completion of training is a contingency for this assignment – OJT or formal classroom training
• Building connectors, splicing wires, crimping, and terminating wires. • Installing connectors to receptacles and electronic components. • Performing repairs, rework processes to incorporate authorized changes outlined by engineering instructions. • Fiber optic clean and inspection, light loss testing, routing and installation.
• Bond & Ground including CRNs, jumpers, ground stud installation & resistance testing. • Operate mechanical lifts of various types. (e. g. JLGs, Magic Carpets, and scissor lifts) • Chemical solvents, sealants, coatings, primers, adhesives, paints and special finishes • Working around energized sources (electrical equipment and hazards/shock, e. g. circuit breakers
and wiring) and exposure to constant noise. • Inspect your work quality and check for FOD (Foreign Object Debris). • Inspect to ensure First Pass Quality (FPQ) is attained per engineering drawings and specifications.
• Finger manipulation (keyboarding, other). • Reading from a computer screen, printed drawings or documents. • Ability to adhere to high standards of Safety and Compliance to regulation • Verify and ensure FAA compliance with Quality Management System. Basic Qualifications (Required Skills/Experience): Ability to work a variable shift (1st, 2nd, or 3rd ) 7+ years of experience in aerospace, fabrication, or manufacturing 7+ years of experience in electrical assembly and/or
electronic materials 7+ years of experience in wire bundle installations, and aircraft electrical systems troubles Must be proficient in using Microsoft applications such as Word, Excel, Power Point & Outlook, etc.
Must have demonstrated strong effective communication, work ethic and sense of urgency for completing assigned task/work. Preferred Qualifications (Desired Skills/Experience): 10+ years’ related work experience or an equivalent combination of education and experience Education / Experience: Education/experience typically acquired through basic education (e. g. High School diploma/GED) and typically 4 or more years' related work experience or an equivalent combination of education and experience (e.
g. vocational school/Associate+2 years' related work, Bachelor, etc. ). Additional Comments: Please note - These positions are variable shifts, contractors must be able to work 1st, 2nd or 3rd shift. Boeing South Carolina Site Requisition – Airport and North Campus SOW Business need Building location dependent on business need Successful completion and clearance of all screening requirements is a contingency for this assignment. Experience understanding and interpreting detailed written and verbal work instructions and processes. Must be proficient in using Microsoft applications such as Word, Excel, Power Point & Outlook, etc.
Must have demonstrated strong effective communication, work ethic and sense of urgency for completing assigned task/work. Deviation Approval Rules 1. To Start Assignment: Must have a negative drug screen and all onboarding paperwork completed by Tuesday prior to start date 2. Training Period: All remaining screening must be completed and cleared before the end of the training period or the contractor cannot move to the floor. Supplier must notify CLA when screening is complete. 3. Suspension: Contractors who have not completed screening by the end of the training period will be suspended from work until screening is complete; upon clearance, they may return to their regular shift 4.
Disqualification: Contractors who do not meet contingency requirements or who do not complete screening in a timely manner will be removed from assignment. Position Comments: Shifts: 1st, 2nd, or 3rd. Contractors must be available to work all 3 shifts. Shifts are dependent on Business needs. Onsite/remote/hybrid: Onsite Successful completion of training is a contingency for this assignment – OJT or formal classroom training Interview Information: no interview, contractors selected based on resume/experience Physical demands (if any):
sending to QC for final inspection. Participate in general housekeeping (5S) duties within work area. Performs general preventative maintenance tasks on area equipment as needed. Cross-train and rotate through various stations within department as needed to provide additional support.
Conduct on-the-job training for newly hired and/or transferred employees. Report material and equipment problems to appropriate personnel. Participate in meetings to resolve production issues and interface with other shifts and support groups as needed. Abilities: General knowledge of manufacturing and hand tools (preferred, but not required). Education: High School Diploma or GED required. Experience: Entry-level position. No experience required. PDN-9ad7bfdb-56e0-4d7d-9837-9c5c8fa91207
customer needs and solve problems. Strong root cause/corrective action skills. Can influence and negotiate with people to resolve issues. Experience with problem solving tools (e. g. 8D, 5-whys, cause and effect, etc. ). Demonstrates ability to lead in a fast-paced technical environment, absorb technical information, review technical information and make technical decisions.
Execute risk and impact backssments. Leads risk backssments (Design and Manufacturing) and risk mitigation plans during the product development cycle. Drive product and process changes to improve product quality. Communicate recommendations and decisions across the organization. Acts as a 'bridge' to transfer
product design to production. Actively engages in implementing lessons learned, best practices during development phases, perform manufacturing readiness reviews and follow through on any open risk items to closure.
Quality System: Understand, apply and meet all function-related Quality requirements. Environmental, Health & Safety (EHS): Understand, apply and meet all function-related EHS requirements. Product Safety: Understand, apply and meet all function-related Product Safety requirements. Compliance: Understand, apply and meet all function-related Compliance requirements. Information Security: Understand, apply and meet all function-related IT / Information Security and confidentiality
of YFAI information requirements. Must comply with all company policies and procedures.
Employee must have the ability to work additional hours and / or overtime as needed or assigned to complete job duties on time. Ability to multitask, interact politely and professionally with customers, suppliers and vendors, and work cooperatively with employees at all levels. Ability to maintain predictable and regular attendance, arrive to designated location on time, or be at assigned location ready to work for assignment Bachelor's Level Degree Area of Study: Preferably in Quality, Industrial of Mechanical Engineering or equivalent work experience in Quality or Engineering related function.
Equivalent work experience may also be considered for certain positions. PDN-9ad7c123-18b4-45e8-bd03-1f7529e32078
From world-class amenities and progressive design to client service with a hospitality-driven approach, we create spaces where people want to be. Core Spaces is proud to be a People-First organization and our culture is our greatest asset. Our six cultural values guide us every day and we strive to live them in everything we do: PUSH (Invent Better Places to Live), GRIT (We Got This), LIFT (Help Each Other Win), SHINE (Bring Your Full Self), UPHOLD (Never Break Trust), GROW (Always Get Better).
What We Do Core Spaces provides living spaces and services that create a better daily life for its residents. Our projects are thoughtfully designed, customized, developed, and managed to create
extraordinary lifestyle experiences that are as unique as their respective markets. Since our founding in 2010, Core has consistently delivered award-winning developments in top markets across the country.
We currently own and/or manage 47 properties nationwide, totaling over 8,500 units and 23,000+ beds - and have a pipeline of over 40,000 units and beds in various stages of development and acquisition. For more information, check us out at: . Benefits That Matter A culture that provides you a sense of belonging Competitive market pay that values your contributions Generous PTO to disconnect or celebrate life milestones Paid 16 holidays to celebrate with those who matter most Paid Family
Leave Plan that begins after 90 days Paid Volunteer time off to give back to your community Robust health plan options that begin within at least 30 days of your employment Wellness allowance and perks, including a yearly subscription to a meditation app An environment that provides you a voice to share your perspectives Employee Assistance Program (EAP) for access to confidential support services Company retirement options including 401(k) + matching & Roth account option Position Overview The Assistant Property Manager is responsible for the financial management of their assigned student housing community, for our Student Housing Property.
This role requires comprehensive financial management, strategic marketing execution, and exceptional resident relationship building.
As the Associate Community Manager, you will be responsible for the seamless operation of all property management aspects and will step in as the Community Manager in their absence. This role is ideal for a professional with robust skills in communication, financial management, and strategic leadership. Join our team and contribute significantly to our thriving community. What You Will Do Leadership and Staff Management: Support in managing all community staff, ensuring optimal team performance and fostering their professional development.
Assist in marketing efforts to attract new tenants, including giving tours of the property, and managing the leasing process. Financial Reporting/Bookkeeping: Responsible for preparing financial statements, such as income statements, balance sheets, and cash flow statement Implement and monitor property reporting requirements to backss performance and identify areas for improvement. Keeping up-to-date records of each tenant's financial transactions, such as rent payments, security deposits, and any additional fees or charge Responsible for tracking all expenses related to the property.
This includes maintenance costs, utility bills, property taxes, insurance, and any other costs Responsible for ensuring that all vendors are paid on time. Rent collection: Efficiently manage rent collection from residents. Conduct follow-ups with residents to address any outstanding delinquencies. Marketing and Leasing: Support Market & Leasing for the property as needed Compliance and Standards: Ensure compliance with all company policies, procedures, and legal requirements. Uphold brand and company standards, ensuring that the property is consistently presented in an exceptional manner.
Special Projects and Reporting: Collaborate with the Regional Manager on special projects and assignments. Complete all assigned HR/People Operations-related tasks. Other: Must be able to work a full shift / required work schedule Must be available for additional hours including evenings, weekends, and overtime when necessary Must be available to assist with move-outs, turn, and move-ins that extend beyond normal full-time hours Ideally, you'll have High School graduate; college degree preferred but not required 2 years of experience in property management or related fields.
You'll crush it if you have experience with Experience with Entrata and Yardi Software(s) Student Housing Experience Organizational Structure Reports to: Community Manager Direct Reports: N/ADisclaimer: Please note that job responsibilities, reporting lines, and duties outlined in this job description are subject to change to meet the organization's evolving needs. As an Equal Opportunity Employer, Core Spaces celebrates diversity and is committed to creating an equitable and inclusive environment, which creates a sense of belonging for all employees. We do not discriminate and believe every individual should be proud of who they are and the community they represent.
PDN-9ad5bec9-ca8d-41eb-a0e5-c2932dfdab73
people together and bringing out the very best in life. So, join us and be a part of a fun, fast-paced, high-impact group of talented people where you belong. Invited reflects our proud history of inclusiveness and captures our welcoming spirit. Our unprecedented collection of more than 200 golf and country, city, and stadium clubs share a common goal- building relationships and enriching lives.
The time has come to build on our traditions and write new chapters. We welcome you to join us. Invited. Where You Belong. Job Summary Director of Food and Beverage is a strategic business leader who is responsible for managing the daily operations of the Club. They will maintain a high standard
of excellence while promoting a People First Culture. Day-to-Day Develops aggressive food beverage sales, marketing, and net revenue plans. Manages the food & beverage department while forecasting requirements, preparing annual budgets, scheduling expenditures, analyzing variances, initiating corrective action plans.
Maintains a safe, secure, and healthy environment by establishing, following, and enforcing sanitation standards and procedures, while complying with legal regulations. Works with the Member committees to develop and implement Member activities and events. Trains and monitors employees while evaluating their performance and productivity. Recruits, selects and develops
talent while maintaining a positive and inclusive work environment.
About You 5 + years in Club Management or related field Bachelor's Degree in Hospitality Management or Business Admin (preferred) Level 1 Sommelier Certification (preferred) Strong written and oral Communication Skills Exceptional leadership skills - Self-motivated, strategic thinker, positive attitude Adaptable to change - can solve problems through an open-minded and all-inclusive approach Comfortable in a fast-paced or high-pressure environment Proficient with POS, Microsoft Office products, and social media Compensation: Salary $70k - $80k -commensurate with experience - Bonus Potential, Benefits, Club Perks, and much more!
Have more questions? Check out our Invited Jobswebsite to get more details about Club Life, the Employee Experience, Company Benefits, and Our Culture. Be a part of our Social Networks: Linked In Instagram Twitter Facebook Invited is an Equal Employment Opportunity Employer / Invited participates in E-Verify. This job post is intended to describe the general requirements for the position. It is not a complete statement of duties, responsibilities, or requirements. Other duties not listed here may be assigned as necessary.
training programs, aids and materials utilizing knowledge of methods in classroom training, e Learning, on-the-job training, and self-study. In addition, this position works collaboratively to provide assistance in training needs identification, the monitoring and backssment of training effectiveness, and organization development interventions for the Brand.
This role consults with the business experts to identify learning needs and to develop and maintain learning solutions that build functional capability and meet business objectives. This position partners closely with internal leaders, as well as franchisees, to ensure a “one brand” focus and alignment of priorities and goals among
all stakeholders. The role will work across boundaries and in conjunction with cross-functional partners to positively impact our 4 Key Results: Team, Guests, Sales, and Profits through the power of our people processes.
Culture being the heart of our work, this role demonstrates the company’s Vision, Mission, and Guiding Principles to role model a culture of belonging and a place for all at Denny’s. ESSENTIAL FUNCTIONS (Key Responsibilities) Consults with business leaders and stakeholders to establish learning and development priorities that drive business and people strategies and create tangible business value. Continuously learns about internal and external factors that impact learning
and performance in organizations; remains aware of trends and anticipates opportunities to add value to the business.
Creates and implements programs and initiatives, including the development of training materials, job aids, and communications. Develops both classroom and on the job programs to enhance functional expertise and brand knowledge/ operational skills. Leads Hospitality Initiatives – collaborates with Consumer Insights and Ops teams to solicit feedback and ensure programs are relevant and on target. Develops innovative and interactive learning solutions that engage our learners and support a culture of sharing and fun. Leverages contemporary interactive technologies to engage and enhance learning, including e Learning tools (MS Office, Articulate Studio ’09, Articulate Storyline2, and other authoring tools), design tools (Adobe CS6) and collaboration platforms (LMS, blogs, Social websites wikis).
Works collaboratively to conduct ongoing learning needs backssments to identify performance gaps and determine the requirements for either the revision of existing learning and development programs or the development of new learning and development materials. Responsible for updates to training content on Ignite. Provides analytical, reporting and tracking support to Learning and Operations.
Other duties as assigned. EDUCATION & EXPERIENCE REQUIREMENTS Education: Bachelor’s degree in related field required. Experience: 1-3 years’ experience in training and training materials development. Demonstrated experience utilizing MS Office Suite. REQUIRED KBOWLEDGE & SKILLS Possess excellent written and verbal communication skills. Effective public speaking skills with the ability to engage learners. Ability to design, develop and deliver functional skills training aligned with business goals and initiatives to drive results in a performance-based learning culture.
Ability to function independently and as part of a team with a positive attitude, strong work ethic and commitment to excellence. Project management skills and demonstrated success in managing/leading initiatives. Licensed to operate an automobile without hours of operations restrictions. Ability to travel (up to 20%), including overnight stays and airline travel when applicable. Strong planning and organizational and time management skills with the ability to manage changing priorities, handle multiple projects, meet deadlines and adapt to a changing business environment.
Denny's, Inc. is committed to providing equal employment opportunity for all persons regardless of age, race, creed, color, national origin, citizenship status, religion, interaction, interactionual orientation, gender identity, disability, genetic information, military or veteran's status, criminal background, or any other characteristic protected by Federal, State, or local law. Applicants requiring reasonable accommodation for any part of the application process should contact 864-597-xyz X. PLEASE DO NOT CONTACT THIS NUMBER TO CHECK THE STATUS OF YOUR APPLICATION.
Denny’s, Inc. participates in E-Verify. We will provide the Social Security Administration, and if necessary, the Department of Homeland Security, with information from each new employee’s Form I-9 to confirm work authorization. For more information on E-Verify, please contact the DHS at 888-897-xyz X or dhs. gov/e-verify. Please note that we do not use this information to pre-screen job applicants.
unparalleled learning journeys that empower our team members. We're in search of an exceptional individual who can infuse this role with strategic vision, innovation, and a dynamic blend of expertise. As our Training Manager, you'll be at the helm of developing and implementing transformative training programs that not only meet the mark but also ignite enthusiasm and drive lasting impact.
ESSENTIAL FUNCTIONS (Key Responsibilities) Collaborate with key stakeholders to identify and understand training needs that align with our organization's strategic goals. Shape and execute comprehensive training strategies that elevate team member performance and contribute to our brand's success.
Skillfully manage training budgets and resources, ensuring efficient allocation and meticulous financial stewardship. Cultivate relationships with external partners and vendors to curate cutting-edge training solutions that set industry benchmarks.
Utilize data-driven insights to continually enhance training programs, adapting to evolving business needs. Foster a collaborative environment that encourages cross-functional cooperation and shared learning. Spearhead the creation of captivating training materials and resources, rooted in adult learning principles and tailored to various styles and skill levels. Effectively communicate with stakeholders at all levels to maintain a unified
vision and ensure strategic alignment. Champion innovation by embracing emerging technologies and methodologies to deliver cutting-edge training experiences.
EDUCATION & EXPERIENCE REQUIREMENTS Education: Bachelor's degree in a relevant field (e. g. Education, Human Resources, Business Management, Organizational Development, or a related discipline). Master's degree or advanced certifications in Learning and Development, Organizational Psychology, or a related field would be a strong advantage. Experience: A minimum of 5 years of progressive experience in training and development, learning management, or a related field. Proven track record of at least 2 years in a leadership role, overseeing training initiatives.
Experience collaborating with cross-functional teams, subject-matter experts, and external partners to develop and deliver effective training programs. Demonstrated success in utilizing data-driven insights to enhance training strategies and drive measurable results. Proficiency in budget management, resource allocation, and vendor collaboration for training initiatives. Strong expertise in developing innovative training materials using a variety of delivery methods, including digital platforms, workshops, and presentations.
Familiarity with industry best practices, emerging trends, and technologies in learning and development. REQUIRED KNOWLEDGE & SKILLS A profound passion for learning and growth, evident in your track record of driving impactful training initiatives. Exceptional communication skills that transcend written and verbal realms, fostering transparent and collaborative interactions. Denny's, Inc. is committed to providing equal employment opportunity for all persons regardless of age, race, creed, color, national origin, citizenship status, religion, interaction, interactionual orientation, gender identity, disability, genetic information, military or veteran's status, criminal background, or any other characteristic protected by Federal, State, or local law.
Applicants requiring reasonable accommodation for any part of the application process should contact 864-597-xyz X. PLEASE DO NOT CONTACT THIS NUMBER TO CHECK THE STATUS OF YOUR APPLICATION. Denny’s, Inc. participates in E-Verify. We will provide the Social Security Administration, and if necessary, the Department of Homeland Security, with information from each new employee’s Form I-9 to confirm work authorization. For more information on E-Verify, please contact the DHS at 888-897-xyz X or dhs.
gov/e-verify. Please note that we do not use this information to pre-screen job applicants.
generous employee benefits. Visit our Employment Page for details. Summary / Purpose of Position: This position's primary responsibility is to ride in truck assisting driver over assigned route to deliver stock to thrift stores, complete donor pick-ups, and service donation centers and efficiently prepare and price donated goods and neatly display them on the sales floor in an organized fashion.
Essential Duties and Responsibilities: Load and unload donations from trucks. Treat all customers and employees with respect and care. Receive donations from donors in a courteous and professional manner. Ensure that all donated goods are properly stored and secured in the truck before the truck
Display priced goods on the sales floor in a neat and organized fashion. Perform daily housekeeping duties such as sweeping, cleaning, and dusting. Projects ministry values and philosophy to clients, donors and ministry employees Have a willingness to share the good news of Jesus Christ, give a personal testimony and pray with/for those served by the ministry Other duties as assigned by the supervisor Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Have the ability to work on one's feet for an entire shift Lift and move 50-100 pounds of donations on a regular basis Be able to operate a pallet jack and move larger loads with the jack Reach to the bottom of gailord box Core Attributes and Expectations: Display a Christ-centered life demonstrated by a willingness to show acceptance and serve others.
Work efficiently and manage time in order to meet production needs as well as other assigned tasks. Show motivation and ability to take initiative in daily tasks and operations. Exhibit good work habits in attendance and punctuality. Treat customers and co-workers in a kind, respectful, and professional manner.
Show respect for the integrity of the workplace through honesty and responsibility. Demonstrate a willingness to learn and an openness to new ideas and changes. Follow all safety guidelines. Qualifications/Education/Certification: Education or equivalent experience: High School Diploma or G. E. D. preferred but not required Years of experience: 1 year License/Certification: Valid SC driver's license desirable but not required. Religious: As an evangelical Christian ministry, Miracle Hill values its rights under federal law to hire individuals who share the Christian faith and the ministry's doctrinal beliefs.
To be considered for employment, ALL APPLICANTS MUST read and agree with our Doctrinal Statement and Employment Qualifications (scroll down on page to see qualifications).
with applications across the textile, flooring, chemical and healthcare businesses, the company harnesses a shared sense of integrity and excellence to positively impact the world for generations. Discover more about Milliken’s curious minds and inspired solutions at and on Facebook , Instagram , Linked In and Twitter.
GENERAL Performs assignments and duties by following established procedures and management guidelines. Deviations from procedures must have prior management approval. Assist in normal receiving, shipping, finished goods, and raw material handling. Responsible for maintaining excellent level of housekeeping in all warehouse areas Maintain forklift license. Ability to operate
a switcher (semi). SHIPPING & RECEIVING Receives raw materials from trucks at warehouse and manufacturing loading docks. Responsibilities include off-loading, sampling, labeling, storage, and paperwork.
Ships finished goods from manufacturing area and warehouse. Includes movement to loading dock area, placement of product and shipping labels on containers, transfer of bill of lading, certificate of analysis & MSDS of truck driver. Responsible for safe, efficient, accurate, and timely receipt, shipment and movement of finished goods and raw materials. Operates computer system to receive raw materials, ship finished goods, complete bin transfers, and other transactions as required (this
includes use of the SAP system via barcoding and terminal interfaces).
Fills out necessary computer sheets, records, and logs. Performs other assignments as required by the warehouse manager. SAFETY : Responsible for safe execution of duties in accordance with the Chemical Manufacturing Safety Rules, including wearing of required personal protective equipment, using of all provided safety devices, following all procedures. Responsible for equipment checkout & startup after planned or emergency shutdown in accordance with established procedures. Actively participate in the safety process through execution of safety audits, participation in safety projects, safety OFI’s, and being an attending and participating member of a safety team.
Complete annual safety training as required. Report all spills to Warehouse Manager. Fill out spill report for any spill greater than 5 gallons. Follow all plant procedures to ensure no negative impacts on the environment, health, safety, security, and Responsible Care processes of Milliken Chemical This position is first shift, hours are typically Monday-Friday 8am-5pm, with occasional over time. Required Certifications : High school diploma or GED equivalent. Willing and able to wear a respirator. Preferred Certifications: Forklift Certified Milliken is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to actual or perceived race, color, creed, religion, interaction or gender (including pregnancy, childbirth or related medical condition, including but not limited to lactation), interactionual orientation, gender identity or gender expression (including transgender status), ancestry, national origin, citizenship, age physical or mental disability, genetic information, marital status, veteran or military status or any other characteristic protected by applicable law.
Learn more about this agency Help Requirements Conditions of Employment You must be a U. S. Citizen to apply for this job. All applicants tentatively selected for VA employment in a testing designated position are subject to urinalysis to screen for illegal drug use prior to appointment.
Applicants who refuse to be tested will be denied employment with VA. Selective Service Registration is required for males born after 12/31/1959. Must be proficient in written and spoken English. You may be required to serve a probationary period. Subject to background/security investigation. Selected applicants will be required to complete an online onboarding process. Must pass pre-employment physical
examination. Participation in the seasonal influenza vaccination program is a requirement for all Department of Veterans Affairs Health Care Personnel (HCP).
Participation in the Coronavirus Disease 2019 (COVID-19) vaccination program is a requirement for all Veterans Health Administration Health Care Personnel (HCP) - See " Additional Information" below for details. Qualifications Basic Requirements : United States Citizenship: Non-citizens may only be appointed when it is not possible to recruit qualified citizens in accordance with VA Policy. English Language Proficiency: DRTs must be proficient in spoken and written English as required by 38 U. S. C. 7402(d), and7407(d).
Certification: All applicants must be certified in general radiologic technology by the American Registry of Radiologic Technology, Radiography (ARRT) (R).
Education: Completion of a full-time training course of at least 24 months in duration (or the equivalent) in a post-high school diagnostic radiologic technology program, evidenced by a certificate or an associate degree, accredited by the Joint Review Committee on Education in Radiologic Technology (JRCERT) or from other accrediting agencies as recognized by the Department of Education (DOE). Credentialing Standards: Public Law 97-35, the Consumer-Patient Radiation Health and Safety Act of 1981, requires that persons who administer radiologic procedures meet the credentialing standards in 42 CFR Part 75, Standards for the Accreditation of Educational Programs and the Credentialing of Radiographic Personnel.
Essentially, they must have successfully completed an educational program that meets or exceeds the standards described in that regulation and is accredited by an organization recognized by the U. S. Department of Education and be certified as radiographers in their field. May qualify based on being covered by the Grandfathering Provision as described in the VA Qualification Standard for this occupation (only applicable to current VHA employees who are in this occupation and meet the criteria).
Grade Determinations : Diagnostic Radiologic Technologist, GS-9: Experience: At least one year of experience equivalent to the next lower grade level (GS-8), directly related to the position being filled that demonstrates the clinical competencies described at that level. GS-8 experience is defined as: Ability to check system for operation and backss acceptable performance based on established guidelines; knowledge of calibration parameters and the ability to make adjustments as needed; knowledge of patient's clinical record, diagnosis, and laboratory results; ability to monitor patient's physiologic changes during the procedure and keep the radiologist informed; skill in using tact, diplomacy, and courtesy in dealings with the customer base, patients, staff, family, visitors, and volunteers; and knowledge of anatomy and physiology, and cross-sectional anatomy, recognizing unusual images, and determining proper positioning to best demonstrate areas of interest.
Demonstrated Knowledge, Skills, and Abilities: The candidate must demonstrate all of the following technical KSAs and demonstrate the potential to acquire the assignment-specific KSAs designated by an asterisk (): Ability to balance the needs of patients and staff while still performing complex scans and procedures.
Knowledge of techniques for gathering relevant information from the medical record, significant others, and health care providers. Ability to backss factors that may contraindicate the procedure. iv. Knowledge of basic first aid and basic life support practices related to radiography. Knowledge of physical backssment, aseptic techniques, intravenous methods and techniques and universal precautions.
Knowledge of pre-procedural, procedural, and post-procedural care of patients. All qualifying experience you possess must be clearly described in your application package. We will not make assumptions when reviewing applications. Failure to demonstrate your experience in your resume may result in disqualification. It is strongly recommended that you write to each KSA in your application package. References: VA 5005, Part II, Appendix G25 Physical Requirements: You will be asked to participate in a pre-employment examination or evaluation as part of the pre-employment process for this position.
Questions about physical demands or environmental factors may be addressed at the time of the evaluation or examination. Education IMPORTANT: A transcript must be submitted with your application if you are basing all or part of your qualifications on education. Note: Only education or degrees recognized by the U. S. Department of Education from accredited colleges, universities, schools, or institutions may be used to qualify for Federal employment. You can verify your education here: http: //ope. ed. gov/accreditation/. If you are using foreign education to meet qualification requirements, you must send a Certificate of Foreign Equivalency with your transcript in order to receive credit for that education.
For further information, visit: http: //www. ed. gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog. html. Additional information Receiving Service Credit or Earning Annual (Vacation) Leave: Federal Employees earn annual leave at a rate (4, 6 or 8 hours per pay period) which is based on the number of years they have served as a Federal employee. Selected applicants may qualify for credit toward annual leave accrual, based on prior work experience or military service experience.
This credited service can be used in determining the rate at which they earn annual leave. Such credit must be requested and approved prior to the appointment date and is not guaranteed. This job opportunity announcement may be used to fill additional vacancies. This position is in the Excepted Service and does not confer competitive status. VA encourages persons with disabilities to apply. The health-related positions in VA are covered by Title 38, and are not covered by the Schedule A excepted appointment authority. Pursuant to VHA Directive 1193.01, VHA health care personnel (HCP) are required to be fully vaccinated against COVID-19 subject to such accommodations as required by law (i.
e. medical, religious or pregnancy). VHA HCPs do not include remote workers who only infrequently enter VHA locations. If selected, you will be required to be fully vaccinated against COVID-19 and submit documentation of proof of vaccination before your start date. The agency will provide additional information regarding what information or documentation will be needed and how you can request a legally required accommodation from this requirement using the reasonable accommodation process.
If you are unable to apply online or need an alternate method to submit documents, please reach out to the Agency Contact listed in this Job Opportunity Announcement. Read more Benefits Help A career with the U. S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent.
Contact the hiring agency for more information on the specific benefits offered.
The initial cut-off date for referral of eligible applications will be November 1, 2023, with subsequent cut-off dates on the 15th of each month. Learn more about this agency Help Requirements Conditions of Employment You must be a U. S. Citizen to apply for this job Designated and/or random drug testing may be required Selective Service Registration is required for males born after 12/31/1959 You may be required to serve a probationary period Subject to a background/security investigation Pre-employment physical required Selected applicants will be required to complete an online onboarding process Qualifications To qualify for this position, applicants must meet all requirements by the closing
date of this announcement, 03/29/2024.
EXPERIENCE: A specific length of training and experience is not required, but you must show evidence of training or experience of sufficient scope and quality of your ability to do the work of this position.
Evidence which demonstrates you possess the knowledge, skills, and ability to perform the duties of this position must be supported by detailed descriptions of such on your resume. Applicants will be rated in accordance with the OPM Federal Wage System Qualification Standards. SCREEN-OUT ELEMENT: Your qualifications will first be evaluated against the prescribed screen out element, which usually appears as question 1 in the on-line questionnaire.
Those applicants who appear to possess at least the minimal acceptable qualification requirement are considered for further rating; those who do not are rated ineligible and are eliminated.
The potential eligibles are then rated against the remainder of the Job Elements: Equipment Assembly, Installation, Repair Interpret Instructions, Specifications (includes blueprint reading) Measurement and Layout Technical Practices Troubleshooting Use and Maintain Tools and Equipment Without more than normal supervision Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e. g. Peace Corps, Ameri Corps) and other organizations (e.
g. professional; philanthropic; religions; spiritual; community; student; social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. Note : A full year of work is considered to be 35-40 hours of work per week. Part-time experience will be credited on the basis of time actually spent in appropriate activities. Applicants wishing to receive credit for such experience must indicate clearly the nature of their duties and responsibilities in each position and the number of hours a week spent in such employment.
Physical Requirements/Working Conditions: Incumbent must be able to read and be familiar with all Building and system blueprints, schematics, drawings, etc. to enable them to trace out, locate, and determine corrective action to take in the event of a system failure. Incumbent must be willing to work odd hours, if required, to include but not limited to weekend and shift work, although the normal tour of duty will be day shift, Monday through Friday.
Pipefitters must monitor and maintain Facility Management Service utility systems such as potable water, hot water, fire alarm, pumping stations, water conditioning units, medical oxygen/ vacuum units, dental, medical, and utility air compressors. He/she monitors and controls the building systems and all associated equipment. Working Conditions: Incumbent makes repairs and installations from ladders, scaffolding, and platforms, and where the systems and equipment worked on hard-to-reach places. Incumbent frequently stands, stoops, bends, kneels, climbs and works in tiring and uncomfortable positions.
Incumbent frequently handles, lifts, carries, and sets up parts and equipment that weigh up to (50 pounds). Occasionally, lifts and carry items that weigh over (50 pounds) with help. Incumbent will work within the medical facility's operating functions and must use all appropriate safety tools and clothing, etc. to protect themselves, other staff and patients. Other assignments can be in remote areas such as sub-basement, machinery rooms, rooftops, roads and walkways. Work is done inside and outside, and is usually dirty, duty and greasy and may contain asbestos or in area where bad smelling fumes are present with may require respirator and will include working with flammable and toxic liquids.
Works off ladders and scaffold. Incumbent frequently exposed to the possibility of uncomfortable heat conditions, live steam and hot pipes. Education This job does not have an education qualification requirement. Additional information Receiving Service Credit or Earning Annual (Vacation) Leave: Federal Employees earn annual leave at a rate (4, 6 or 8 hours per pay period) which is based on the number of years they have served as a Federal employee. VA may offer newly-appointed Federal employee's credit for their job-related non-federal experience or active duty uniformed military service.
This credited service can be used in determining the rate at which they earn annual leave. Such credit must be requested and approved prior to the appointment date and is not guaranteed. Special Employment Consideration: VA encourages persons with disabilities to apply, including those eligible for hiring under 5 CFR 213.3102(u), Schedule A, Appointment of persons with disabilities [i. e. intellectual disabilities, severe physical disabilities, or psychiatric disabilities], and/or Disabled veterans with a compensable service-connected disability of 30% or more.
Contact the Agency Contact for information on how to apply under this appointment authority via the Selective Placement Coordinator. The Interagency Career Transition Assistance Plan (ICTAP) and Career Transition Assistance Plan (CTAP) provide eligible displaced Federal/VA competitive service employees with selection priority over other candidates for competitive service vacancies. To be qualified you must submit appropriate documentation (a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting current position, grade level, and duty location) and be found well-qualified (have a final rating of 85 or more) for this vacancy.
Information about ICTAP and CTAP eligibility is on OPM's Career Transition Resources website at http: //www. opm. gov/policy-data-oversight/workforce-restructuring/employee-guide-to-career-transition/. Placement Policy: The posting of this announcement does not obligate management to fill a vacancy or vacancies by promotion. The position may be filled by reassignment, change to lower grade, transfer, appointment, or reinstatement. Management may use any one or any combination of these methods to fill the position.
It is the policy of the VA to not deny employment to those that have faced financial hardships or periods of unemployment. This job opportunity announcement may be used to fill additional vacancies. Veterans and Transitioning Service Members : Please visit the VA for Vets site for career-search tools for Veterans seeking employment at VA, career development services for our existing Veterans, and coaching and reintegration support for military service members. Financial disclosure not required. For more information on the " Who may apply" eligibility requirements, please refer to the OHRM Status Candidates and Other Candidate Definitions document.
If you are unable to apply online view the following link for information regarding an Alternate Application. help. usastaffing. gov/Apply/index. php? title=Alternate_Application_Information Read more Benefits Help A career with the U. S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits.
Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
and marketing of our billions of Med Tech products per year-to look at the impossible and find transformative solutions that turn dreams into possibilities. We believe that the human element, across our global teams, is what allows us to continually evolve.
Join us and discover an environment in which you'll be supported to learn, grow and become your best self. Become a maker of possible with us. Position Summary Provides technical support, primarily mechanical, to production operations. Sign- On Bonus $1,500! for qualified applicants ESSENTIAL FUNCTIONS Operates, sets-up, adjusts, changeovers/trouble shoots and repairs/maintains all departmental production equipment. Responsibilities
include production, quality, downtime and waste levels of machine operation. Provides leadership and training for associates on production floor. Must project positive attitude with excellent team skills.
Interacts with machine shop personnel to resolve and improve equipment operation and processes. Provides leadership in a team environment. Trains and advises TA and fellow associates on proper set-ups and repairs of equipment. Trains TA's in methodical problem solving techniques. Collaborate with engineering and Manufacturing Technicians (MT's) to direct completion of required projects. Uses available resources: engineering, machine shop, production and maintenance departments as required.
Organizes and directs improvement projects to increase equipment utilization.
These are to be done in conjunction with area engineer, production supervisor and other resources that may be required. Audits preventative maintenance (PM) procedures and activities of TA's and fellow associates. Documents electronically PM audits to supervisor for corrective actions. Analyzes equipment failures for frequency of failure in order to modify/update PM work order. Sets up and debugs equipment to documented specifications. Deviations from these specifications must be cleared with the supervisor or Engineering. Maintains equipment in working order to produce product within specified quality and quantity limits, adjusting, trouble shooting, cleaning and repairing as necessary.
Maintains equipment logs for each piece of equipment, recording pertinent information about downtime and maintenance problems. MUST have clear and legible handwriting. Repairs equipment and reports major problems to supervisor. Coordinates maintenance activities with Maintenance Department, Engineering, or other technical resources, as needed for major repairs/production issues. Performs preventative maintenance on the equipment as specified in the PM program or as needed for smooth operation.
Tracks and audits PM's to ensure they are completed and closed out in the SAP system. Turns on machines and ensures proper functioning of machines and control panels. Makes certain safety guards are in position and working properly. Verifies that part tracks/rails are clean to ensure free travel of all component parts. Monitors production machinery as needed to ensure top performance. ADDITIONAL RESPONSIBILITIES Supports all upstream and downstream operations. Maintains toolbox and surrounding area neat and clean. Verifies that equipment-surrounding areas are clean during the shift.
Performs other duties as required. JOB QUALIFICATIONS Education and Experience: High School Diploma or GED or equivalent experience preferred Associates Degree (Major: Advanced Mechatronics Technology) preferred Previousleadership roles or supervisory experience required Mechanical Proficiency and Experience required Proficient with basic hand tools. Knowledgeable of feeler gauges and other tools to measure tolerances, torque, and clearances. Minimum of 2 years as Set-up, Technical Associate role or equivalent. Shouldbe familiar withtrouble shootingcams, cam-followers, rod-ends, bushings, chain drives, conveyors, gearboxes, vacuum systems, pneumatic systems, and ball-valves.
Basic electrical knowledge and experience with PLC's and pneumatic systems preferred Completed coursework in following subjects required (relevant experience may be substituted for individual courses): Schematics Basic Principles of Mechanics Industrial Electricity Problem Solving for Mechanical Applications Introduction to Industrial Technology For certain roles at BD, employment is contingent upon the Company's receipt of sufficient proof that you are fully vaccinated against COVID-19. In some locations, testing for COVID-19 may be available and/or required.
Consistent with BD's Workplace Accommodations Policy, requests for accommodation will be considered pursuant to applicable law. Why Join Us? A career at BD means being part of a team that values your opinions and contributions and that encourages you to bring your authentic self to work. It's also a place where we help each other be great, we do what's right, we hold each other accountable, and learn and improve every day. You will learn and work alongside inspirational leaders and colleagues who are equally passionate and committed to fostering an inclusive, growth-centered, and rewarding culture.
You will have the opportunity to help shape the trajectory of BD while leaving a legacy at the same time. And through the organization's investment in BD University, you will continually level up your tech skills and expertise. To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of health. At BD, you'll discover a culture in which you can learn, grow and thrive.
And find satisfaction in doing your part to make the world a better place. To learn more about BD visit /careers Becton, partinson and Company is an Equal Opportunity/Affirmative Action Employer. We do not unlawfully discriminate on the basis of race, color, religion, age, interaction, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or interactionual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, or any other protected status. Primary Work Location USA SC - Sumter Additional Locations Work Shift Show More Show Less Apply Save Job Lead Technical Associate (Onsite) Job Description Summary Job Description We are the makers of possible BD is one of the largest global medical technology companies in the world.
Advancing the world of health is our Purpose, and it's no small feat. It takes the imagination and passion of all of us-from design and engineering to the manufacturing and marketing of our billions of Med Tech products per year-to look at the impossible and find transformative solutions that turn dreams into possibilities. We believe that the human element, across our global teams, is what allows us to continually evolve.
Join us and discover an environment in which you'll be supported to learn, grow and become your best self. Become a maker of possible with us. Position Summary Provides technical support, primarily mechanical, to production operations. Sign- On Bonus $1,500! for qualified applicants ESSENTIAL FUNCTIONS Operates, sets-up, adjusts, changeovers/trouble shoots and repairs/maintains all departmental production equipment. Responsibilities include production, quality, downtime and waste levels of machine operation. Provides leadership and training for associates on production floor.
Must project positive attitude with excellent team skills. Interacts with machine shop personnel to resolve and improve equipment operation and processes. Provides leadership in a team environment. Trains and advises TA and fellow associates on proper set-ups and repairs of equipment. Trains TA's in methodical problem solving techniques. Collaborate with engineering and Manufacturing Technicians (MT's) to direct completion of required projects. Uses available resources: engineering, machine shop, production and maintenance departments as required.
Organizes and directs improvement projects to increase equipment utilization. These are to be done in conjunction with area engineer, production supervisor and other resources that may be required. Audits preventative maintenance (PM) procedures and activities of TA's and fellow associates. Documents electronically PM audits to supervisor for corrective actions. Analyzes equipment failures for frequency of failure in order to modify/update PM work order. Sets up and debugs equipment to documented specifications. Deviations from these specifications must be cleared with the supervisor or Engineering.
Maintains equipment in working order to produce product within specified quality and quantity limits, adjusting, trouble shooting, cleaning and repairing as necessary. Maintains equipment logs for each piece of equipment, recording pertinent information about downtime and maintenance problems. MUST have clear and legible handwriting. Repairs equipment and reports major problems to supervisor. Coordinates maintenance activities with Maintenance Department, Engineering, or other technical resources, as needed for major repairs/production issues. Performs preventative maintenance on the equipment as specified in the PM program or as needed for smooth operation.
Tracks and audits PM's to ensure they are completed and closed out in the SAP system. Turns on machines and ensures proper functioning of machines and control panels. Makes certain safety guards are in position and working properly. Verifies that part tracks/rails are clean to ensure free travel of all component parts. Monitors production machinery as needed to ensure top performance. ADDITIONAL RESPONSIBILITIES Supports all upstream and downstream operations. Maintains toolbox and surrounding area neat and clean.
Verifies that equipment-surrounding areas are clean during the shift. Performs other duties as required. JOB QUALIFICATIONS Education and Experience: High School Diploma or GED or equivalent experience preferred Associates Degree (Major: Advanced Mechatronics Technology) preferred Previousleadership roles or supervisory experience required Mechanical Proficiency and Experience required Proficient with basic hand tools. Knowledgeable of feeler gauges and other tools to measure tolerances, torque, and clearances. Minimum of 2 years as Set-up, Technical Associate role or equivalent.
Shouldbe familiar withtrouble shootingcams, cam-followers, rod-ends, bushings, chain drives, conveyors, gearboxes, vacuum systems, pneumatic systems, and ball-valves. Basic electrical knowledge and experience with PLC's and pneumatic systems preferred Completed coursework in following subjects required (relevant experience may be substituted for individual courses): Schematics Basic Principles of Mechanics Industrial Electricity Problem Solving for Mechanical Applications Introduction to Industrial Technology For certain roles at BD, employment is contingent upon the Company's receipt of sufficient proof that you are fully vaccinated against COVID-19.
In some locations, testing for COVID-19 may be available and/or required. Consistent with BD's Workplace Accommodations Policy, requests for accommodation will be considered pursuant to applicable law. Why Join Us? A career at BD means being part of a team that values your opinions and contributions and that encourages you to bring your authentic self to work. It's also a place where we help each other be great, we do what's right, we hold each other accountable, and learn and improve every day. You will learn and work alongside inspirational leaders and colleagues who are equally passionate and committed to fostering an inclusive, growth-centered, and rewarding culture.
You will have the opportunity to help shape the trajectory of BD while leaving a legacy at the same time. And through the organization's investment in BD University, you will continually level up your tech skills and expertise. To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of health.
At BD, you'll discover a culture in which you can learn, grow and thrive. And find satisfaction in doing your part to make the world a better place. To learn more about BD visit /careers Becton, partinson and Company is an Equal Opportunity/Affirmative Action Employer. We do not unlawfully discriminate on the basis of race, color, religion, age, interaction, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or interactionual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, or any other protected status.
Primary Work Location USA SC - Sumter Additional Locations Work Shift Show More Show Less Apply Save Job PDN-9ad5bfc0d-969d-8eebc7b7617f
etc. Must be able to lift 50 plus pounds and work both independently and alongside other crew members. Note: If selected for hire, any offer of employment is contingent upon completion of our two-step pre-employment screening with satisfactory results for both the background check and the monitored drug test.
rates, exceptional education programs and opportunities for professional growth. ## Our Neurology Telemetry (8 Tower)#has 28 beds (Tele/Oxygen monitored), 1:4/5 nurse to patient ratio (depending on acuity) with an average stay of 4-5 days and an average age of 63.
# This unit#s patient population includes: Stroke, TBI, Spinal Cord Injury, Neuro Surgeries, Lumba Fusions, Anterior Cervical Surgery, Seizures, etc. # The team personality is motivated, flexible, inclusive, collaborative with a great learning environment with awesome preceptors and team longevity. ## The leaders#are very supportive of team members transitioning to critical care#and provide top notch training for top notch success/patient
care. # Our diverse patient population and case types enables this unit to grow#SRHS Strong RNs! # Position Summary The New Graduate Registered Nurse demonstrates knowledge while providing professional nursing care through Transition to Practice, clinical backssment, outcome identification, planning, and implementation in accordance with SRHS policies and procedures.
The New Graduate RN performs all job-related responsibilities in a safe manner while collaborating with healthcare team members. # To apply: # Step One: Complete the application by clicking the apply button. # Step Two: #The New Grad RN survey will be emailed to you once you complete step one. # Minimum Requirements Education###########
Graduate of an approved school of nursing Experience######## Less than 1 year RN experience License/Registration/Certifications####### Current R.
N. licensure in the state of South Carolina BLS ACLS, PALS/ENPC (depending on patient assignment) Core Job Responsibilities Collaborates with patients, families, and other members of the health care team to determine patient priorities and treatments Initiates and facilitates interdisciplinary collaboration to enhance outcomes Seeks necessary assistance in completing nursing interventions to assure positive patient outcomes Participates in hourly rounding and bedside shift report Responsible for demonstrating competency for all new equipment and procedures.
Provides clinical guidance to students and ancillary staff Successfully completes hospital and unit-based orientation programs Formulates a plan for professional growth Ensures compliance with all clinical expectations regarding regulatory requirements Identifies appropriate standards of care, and/or collaborative clinical pathways to guide the plan of care Complies with established policies and procedures Identifies the need to develop or revise policies and procedures pertaining to specialized patient populations and/or unit and hospital-based practices Prioritizes nursing interventions for an assigned group of patients backsses assigned patients# medical history, admitting diagnosis and physician#s orders, obtaining nursing history, performing physical backssment, evaluating diagnostic data, and interviewing patient and family to determine patient needs Demonstrates knowledge of professional nursing practice and theory.
Assures continuity of care through effective decision making resulting in quality patient care Documents all aspects of patient care by following established charting procedure to show the patient#s progress or any change in the patient#s condition Other Duties as assigned # Spartanburg Regional offers a wide range of market competitive benefits and compensation.
# For our#full-time associates, we provide the following (but not limited to) services and benefits: ## Health, Dental, and Vision plans## Prescription Drug Plan and Employee shop## Infertility and adoption benefits## Care Plus Disease Management Program, Wellness, Rapid Weight Loss, Nicotine Cessation, Child Development, and Pampered Pregnancy Program## Flexible Spending Accounts for Medical and Dependent Care## Life Insurance and AD#D## Free On-Site Parking## 401(k) Tax-Deferred Plans## Paid-Time Off## Discount and Purchase Programs## Rewards # Recognition Program## Relocation Assistance### Tuition Reimbursement# # We invite you to apply if you are seeking an opportunity to make a difference!
# Our long tenured team are hardworking, supportive, compassionate with excellent clinical skills. # We enjoy partnering with patients and their families to impact care. Sign On Bonus Offer: New Grads--$5,000 Our 540 Bed Level 1 Trauma acute care hospital offers a wide range of services and is part of an organization with 6 acute care facilities, over 10,000 team members and 400 volunteers.
Join our team of highly regarded staff and receive an attractive salary and benefits package, including increased pay rates, exceptional education programs and opportunities for professional growth. Our Neurology Telemetry (8 Tower) has 28 beds (Tele/Oxygen monitored), 1:4/5 nurse to patient ratio (depending on acuity) with an average stay of 4-5 days and an average age of 63. This unit's patient population includes: Stroke, TBI, Spinal Cord Injury, Neuro Surgeries, Lumba Fusions, Anterior Cervical Surgery, Seizures, etc. The team personality is motivated, flexible, inclusive, collaborative with a great learning environment with awesome preceptors and team longevity.
The leaders are very supportive of team members transitioning to critical care and provide top notch training for top notch success/patient care. Our diverse patient population and case types enables this unit to grow SRHS Strong RNs! Position Summary The New Graduate Registered Nurse demonstrates knowledge while providing professional nursing care through Transition to Practice, clinical backssment, outcome identification, planning, and implementation in accordance with SRHS policies and procedures.
The New Graduate RN performs all job-related responsibilities in a safe manner while collaborating with healthcare team members. To apply: Step One: Complete the application by clicking the apply button. Step Two: The New Grad RN survey will be emailed to you once you complete step one. Minimum Requirements Education Graduate of an approved school of nursing Experience Less than 1 year RN experience License/Registration/Certifications Current R. N. licensure in the state of South Carolina BLS ACLS, PALS/ENPC (depending on patient assignment) Core Job Responsibilities Collaborates with patients, families, and other members of the health care team to determine patient priorities and treatments Initiates and facilitates interdisciplinary collaboration to enhance outcomes Seeks necessary assistance in completing nursing interventions to assure positive patient outcomes Participates in hourly rounding and bedside shift report Responsible for demonstrating competency for all new equipment and procedures.
Provides clinical guidance to students and ancillary staff Successfully completes hospital and unit-based orientation programs Formulates a plan for professional growth Ensures compliance with all clinical expectations regarding regulatory requirements Identifies appropriate standards of care, and/or collaborative clinical pathways to guide the plan of care Complies with established policies and procedures Identifies the need to develop or revise policies and procedures pertaining to specialized patient populations and/or unit and hospital-based practices Prioritizes nursing interventions for an assigned group of patients backsses assigned patients' medical history, admitting diagnosis and physician's orders, obtaining nursing history, performing physical backssment, evaluating diagnostic data, and interviewing patient and family to determine patient needs Demonstrates knowledge of professional nursing practice and theory.
Assures continuity of care through effective decision making resulting in quality patient care Documents all aspects of patient care by following established charting procedure to show the patient's progress or any change in the patient's condition Other Duties as assigned Spartanburg Regional offers a wide range of market competitive benefits and compensation. For our full-time associates, we provide the following (but not limited to) services and benefits: Health, Dental, and Vision plans Prescription Drug Plan and Employee shop Infertility and adoption benefits Care Plus Disease Management Program, Wellness, Rapid Weight Loss, Nicotine Cessation, Child Development, and Pampered Pregnancy Program Flexible Spending Accounts for Medical and Dependent Care Life Insurance and AD&D Free On-Site Parking 401(k) Tax-Deferred Plans Paid-Time Off Discount and Purchase Programs Rewards & Recognition Program Relocation Assistance Tuition Reimbursement We invite you to apply if you are seeking an opportunity to make a difference!
Our long tenured team are hardworking, supportive, compassionate with excellent clinical skills. We enjoy partnering with patients and their families to impact care. For more details: jobs-search. org/insurance_spartanburg-c446396/job_i1959354652
